Induction Braze Carbide Inserts to Prevent Defects in Tool Tips

Kaiser Tool’s Groove ‘N Turn line includes the Thinbit tools with right-hand, counter-clockwise face grooving inserts. The tools are designed to cut internal face grooves with major diameters starting at 0.300". The Groove TCMT Insert ‘N Turn inserts are available in 0.004" through 0.150" in 0.001" increments with options including sharp corner through full radius. Major diameters are offered in 0.300"Carbide Turning Inserts , 0.750", 1.250" and 3.000". These inserts are made from sub-micron grain carbide with grades for ferrous and non-ferrous materials, either uncoated or with TiN, TiCN, TiAIN, or diamond film coatings.

The inserts can be used in conventional, Swiss-type and CNC machines. Toolholders are available in square shank sizes 5/16" through 1¼", and round shank sizes ½" through 1" with straight and 90-degree presentations. Groove ‘N Turn inserts fit all L-series toolholders and modifications can be provided on any Thinbit tooling.

The Cemented Carbide Blog: Carbide Inserts

Kaiser Tool’s Groove ‘N Turn line includes the Thinbit tools with right-hand, counter-clockwise face grooving inserts. The tools are designed to cut internal face grooves with major diameters starting at 0.300". The Groove TCMT Insert ‘N Turn inserts are available in 0.004" through 0.150" in 0.001" increments with options including sharp corner through full radius. Major diameters are offered in 0.300"Carbide Turning Inserts , 0.750", 1.250" and 3.000". These inserts are made from sub-micron grain carbide with grades for ferrous and non-ferrous materials, either uncoated or with TiN, TiCN, TiAIN, or diamond film coatings.

The inserts can be used in conventional, Swiss-type and CNC machines. Toolholders are available in square shank sizes 5/16" through 1¼", and round shank sizes ½" through 1" with straight and 90-degree presentations. Groove ‘N Turn inserts fit all L-series toolholders and modifications can be provided on any Thinbit tooling.

The Cemented Carbide Blog: Carbide Inserts

Kaiser Tool’s Groove ‘N Turn line includes the Thinbit tools with right-hand, counter-clockwise face grooving inserts. The tools are designed to cut internal face grooves with major diameters starting at 0.300". The Groove TCMT Insert ‘N Turn inserts are available in 0.004" through 0.150" in 0.001" increments with options including sharp corner through full radius. Major diameters are offered in 0.300"Carbide Turning Inserts , 0.750", 1.250" and 3.000". These inserts are made from sub-micron grain carbide with grades for ferrous and non-ferrous materials, either uncoated or with TiN, TiCN, TiAIN, or diamond film coatings.

The inserts can be used in conventional, Swiss-type and CNC machines. Toolholders are available in square shank sizes 5/16" through 1¼", and round shank sizes ½" through 1" with straight and 90-degree presentations. Groove ‘N Turn inserts fit all L-series toolholders and modifications can be provided on any Thinbit tooling.

The Cemented Carbide Blog: Carbide Inserts